New:Embedded & IoT Bootcamp
Course Level: IntermediateDuration: 12 hoursLessons: 6Price: Free Featured

Embedded & IoT Bootcamp

Design, wire and program real IoT devices with Arduino and ESP32, from sensors to cloud dashboards.

Abhishek Sharma 2026-07-18 Embedded & IoT / Arduino

Preview video coming soon

The full curriculum is available below.

What you will learn

Wire sensors and actuators safely on a breadboard
Read digital, analog, I2C and SPI devices
Connect an ESP32 to Wi-Fi and publish telemetry
Build a cloud dashboard with alerts and historical data

Curriculum

6 lessons

Intermediate
  1. 01 Microcontrollers and the toolchain Boards, GPIO, the IDE and your first sketch. 40 min
  2. 02 Digital and analog input Buttons, debouncing, potentiometers and ADC resolution. 52 min
  3. 03 Buses: I2C and SPI Addressing, wiring and debugging common bus failures. 1 hr 5 min
  4. 04 Actuators and power Relays, drivers, motors and safe grounding. 1 hr
  5. 05 ESP32 and Wi-Fi Provisioning, HTTP clients and MQTT publishing. 1 hr 15 min
  6. 06 Dashboards and alerts Store telemetry, visualise it and trigger notifications. 1 hr 20 min

Kit requirements

An Arduino Uno or ESP32 board, a breadboard, jumper wires, and a small sensor kit. Every lesson lists exact parts and wiring diagrams.

Want more like this?

Browse the full courses library, organised by topic.

All courses

Related learning

Tutorial2026-05-30

ESP8266/ESP32 – Wi-Fi Communication

ESP8266/ESP32 – Wi-Fi Communication interfacing with Arduino.

Embedded/IoT / Arduino / Interfacing / Communication Modules

ArduinoWi-Fi
Tutorial2026-05-31

8x8 Dot Matrix Display (MAX7219)

8x8 Dot Matrix Display interfacing with Arduino using MAX7219.

Embedded/IoT / Arduino / Interfacing / Displays & Interfaces

Arduino
Tutorial2026-05-31

BMP180 Barometric Pressure

BMP180 Barometric Pressure interfacing with Arduino.

Embedded/IoT / Arduino / Interfacing / Environment

Arduino